ANALISIS STATIK, BUCKLING, DAN MODAL PADA RANGKA MESIN INTEGRASI PENCACAH-PELLETIZER MENGGUNAKAN METODE ELEMEN HINGGA
Static, Buckling, And Modal Analysis Of The Machine Frame For An Integrated Shredder-Pelletizer System Using The Finite Element Method
DOI:
https://doi.org/10.46964/bbyx6192Keywords:
Rancang bangun, Mesin pencacah, Pelletizer, Motor bensin, Ansys StudentAbstract
Biaya pakan yang mencapai 60% sampai 70% dari total biaya produksi, ditambah penggunaan mesin yang terpisah, membuat produksi pakan mandiri di tingkat peternak kurang efisien. Penelitian ini merancang dan membuat mesin pencacah dan pelletizer terintegrasi yang digerakkan satu motor bensin 15 HP dengan starter elektrik. Perancangan mencakup pemodelan 3D dengan SolidWorks, perhitungan elemen mesin (daya, pulley, V-belt, poros, pasak, bantalan, dan las), serta analisis rangka baja ST 37 dengan Ansys berupa static structural, eigenvalue buckling, dan modal. Unit pencacah memakai empat pisau HSS dan delapan mata penepung, sedangkan unit pelet bertipe flat die dengan gearbox WPA 80 rasio 1:60. Hasil simulasi menunjukkan rangka bekerja di daerah elastis dengan regangan ekuivalen maksimum 5,1108×10-5 mm/mm dan beban tekuk kritis jauh di atas beban kerja. Pengujian memberikan kapasitas rata-rata pencacah 135 kg/jam dan pelet 38,6 kg/jam
References
[1] M. Thomas and A. F. B. van der Poel, “Fundamental factors in feed manufacturing: Towards a unifying conditioning/pelleting framework,” Anim. Feed Sci. Technol., vol. 268, p. 114612, Oct. 2020, doi: 10.1016/j.anifeedsci.2020.114612.
[2] T. M. M. Bastiaansen et al., “Changes in thermomechanical properties of feed in relation to composition and their effect on pellet manufacturing,” Anim. Feed Sci. Technol., vol. 295, p. 115540, Jan. 2023, doi: 10.1016/j.anifeedsci.2022.115540.
[3] T. M. M. Bastiaansen et al., “Identifying feed characteristics that affect the pellet manufacturing of livestock diets containing different coproducts,” Clean. Circ. Bioeconomy, vol. 7, p. 100073, Apr. 2024, doi: 10.1016/j.clcb.2024.100073.
[4] M. A. Ebbing, N. Yacoubi, V. Naranjo, W. Sitzmann, K. Schedle, and M. Gierus, “Towards Large Particle Size in Compound Feed: Using Expander Conditioning Prior to Pelleting Improves Pellet Quality and Growth Performance of Broilers,” Animals, vol. 12, no. 19, p. 2707, Oct. 2022, doi: 10.3390/ani12192707.
[5] M. S. Rueda et al., “Evaluation of particle size and feed form on performance, carcass characteristics, nutrient digestibility, and gastrointestinal tract development of broilers at 39 d of age,” Poult. Sci., vol. 103, no. 3, p. 103437, Mar. 2024, doi: 10.1016/j.psj.2024.103437.
[6] D. Melo-Durán et al., “Influence of Particle Size and Xylanase in Corn-Soybean Pelleted Diets on Performance, Nutrient Utilization, Microbiota and Short-Chain Fatty Acid Production in Young Broilers,” Animals, vol. 10, no. 10, p. 1904, Oct. 2020, doi: 10.3390/ani10101904.
[7] J. I. Orisaleye, S. O. Jekayinfa, A. A. Ogundare, O. A. Adefuye, and E. Bamido, “Effect of screen size on particle size distribution and performance of a small-scale design for a combined chopping and milling machine,” Clean. Eng. Technol., vol. 7, p. 100426, Apr. 2022, doi: 10.1016/j.clet.2022.100426.
[8] H. El Ghobashy et al., “Development and evaluation of a dual-purpose machine for chopping and crushing forage crops,” Heliyon, vol. 9, no. 4, p. e15460, Apr. 2023, doi: 10.1016/j.heliyon.2023.e15460.
[9] M. Naeem, M. R. Bedford, E. J. Burton, and M. R. Azhar, “Investigating the effect of pelleting on the particle size of commercial poultry feeds: a case study,” J. Appl. Poult. Res., vol. 33, no. 1, p. 100390, Mar. 2024, doi: 10.1016/j.japr.2023.100390.
[10] A. Yang, W. Xiang, B. Yan, Y. Duan, J. Lv, and M. Wu, “Optimization and Test of Structural Parameters of Flat Hob Chopper,” Agriculture, vol. 12, no. 6, p. 824, Jun. 2022, doi: 10.3390/agriculture12060824.
[11] K. P. Kumar Reddy, S. R. Kumar, and B. Nageswara Rao, “Multi-objective optimization for minimize cutting force and power consumption in corn stalk chopping processes,” Heliyon, vol. 10, no. 15, p. e35373, Aug. 2024, doi: 10.1016/j.heliyon.2024.e35373.
[12] D. Wilczyński, K. Talaśka, D. Wojtkowiak, J. Górecki, and K. Wałęsa, “Energy consumption of the biomass cutting process preceding the biofuel production,” Biosyst. Eng., vol. 237, pp. 142–156, Jan. 2024, doi: 10.1016/j.biosystemseng.2023.12.007.
[13] B. Zhou, S. Ma, W. Li, C. Peng, and W. Li, “Study on sugarcane chopping and damage mechanism during harvesting of sugarcane chopper harvester,” Biosyst. Eng., vol. 243, pp. 1–12, Jul. 2024, doi: 10.1016/j.biosystemseng.2024.04.019.
[14] F. Peng, R. Xiang, F. Fang, and D. Liu, “Analysis of feed pelleting characteristics based on a single pellet press device,” Int. J. Agric. Biol. Eng., vol. 15, no. 4, pp. 65–70, 2022, doi: 10.25165/j.ijabe.20221504.6155.
[15] T. M. M. Bastiaansen et al., “Separating the effect of die geometry and mash residence time in the die on biomass and livestock feed pellet manufacturing,” Biomass and Bioenergy, vol. 190, p. 107383, Nov. 2024, doi: 10.1016/j.biombioe.2024.107383.
[16] A. Gao, Q. Dong, and W. Sun, “Study on Flat Die Wear Characteristics in Flat Die Pelletizing with Different Material Ratios Based on DEM-FEM,” Agriculture, vol. 14, no. 6, p. 894, Jun. 2024, doi: 10.3390/agriculture14060894.
[17] S. Xing, J. W. Schrama, X. Liang, R. Liu, M. Xue, and H. Wang, “Partial replacement of fish meal by cottonseed protein concentrate and the effects of preconditioning water content and die temperature on pellet physical quality of extruded floating fish feed,” Anim. Feed Sci. Technol., vol. 304, p. 115746, Oct. 2023, doi: 10.1016/j.anifeedsci.2023.115746.
[18] C. N. Truelock, A. D. Yoder, C. E. Evans, C. R. Stark, and C. B. Paulk, “The effects of pelleting process parameters and phytase source on the in-feed stability of phytase,” Anim. Feed Sci. Technol., vol. 294, p. 115407, Dec. 2022, doi: 10.1016/j.anifeedsci.2022.115407.
[19] A. Renner et al., “Interaction of ambient temperature and conditioning temperatures on moisture addition throughout pelleting, the pelleting process, and enzyme activity,” J. Appl. Poult. Res., vol. 35, no. 1, p. 100636, Mar. 2026, doi: 10.1016/j.japr.2025.100636.
[20] S. O. Jekayinfa, F. A. Ola, F. B. Akande, M. A. Adesokan, and I. A. Abdulsalam, “Modification and Performance Evaluation of a Biomass Pelleting Machine,” AgriEngineering, vol. 6, no. 3, pp. 2214–2228, Jul. 2024, doi: 10.3390/agriengineering6030130.
[21] J. You, D. Tulpan, C. Krziyzek, and J. L. Ellis, “Prediction of Pellet Durability Index in a commercial feed mill using multiple linear regression with variable selection and dimensionality reduction,” J. Anim. Sci., vol. 103, Jan. 2025, doi: 10.1093/jas/skaf021.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Mekanik: Jurnal Ilmiah Bidang Teknik Mesin

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.




























