PROTEKSI KOROSI PADA BAJA ASTM A53 DENGAN INHIBITOR EKSTRAK DAUN RAMBUTAN DENGAN BLENDING NaNO2 DALAM MEDIA GARAM DAPUR (NaCl) 3,5%

Authors

  • Ahmad Rijal

DOI:

https://doi.org/10.46964/jimsi.v6i1.1840

Keywords:

ASTM A53 steel, blending, corrosion inhibitor, rambutan leaf extract, 3.5% NaCl

Abstract

Rambutan leaves (Nephelium lappaceum) contain tannin compounds that can be utilized as environmentally friendly
corrosion inhibitors. Corrosion inhibitors are substances added to a corrosive environment to reduce the corrosion
rate of metals. This study aims to investigate the effect of rambutan leaf extract inhibitor concentration and blended
inhibitors consisting of rambutan leaf extract and sodium nitrite (NaNO₂) on the corrosion rate of ASTM A53 steel in
a 3.5% NaCl medium. Corrosion rate measurements were conducted using the weight loss method. Rambutan leaf
extract was prepared through maceration using 96% ethanol for five days. The inhibitors were applied at
concentrations of 0, 150, 300, 450, 600, 750, 900, and 1050 ppm with a 1:1 blending ratio. ASTM A53 steel specimens
were immersed for seven days. The analyses included corrosion rate, inhibition efficiency, macro photography, SEM,
and XRF. The results showed that uninhibited steel exhibited a corrosion rate of 5.82 mpy. The lowest corrosion rate
for rambutan leaf extract was 0.18 mpy at 150 ppm with an inhibition efficiency of 96.88%. Meanwhile, the blended
inhibitor achieved the lowest corrosion rate of 0.31 mpy at 150 ppm with an inhibition efficiency of 94.64%. SEM
analysis confirmed reduced surface damage after inhibitor application

Downloads

Published

2026-10-23