ANALISIS KINERJA HEAT EXCHANGER PADA PREHEATER CDU V DI KILANG RU V BALIKPAPAN
Abstract views: 342
,
pdf downloads: 447
Abstract
Separation of crude oil in a petroleum processing plant requires a tool for heat exchanger. Heat Exchanger is used to transfer heat between two or more fluids that have a temperature difference, ranging from a high-temperature fluid to a low-temperature fluid. This process at PT. PERTAMINA RU V Balikpapan is located in the Crude Distillation Unit V (CDU V). The part of the heat exchanger that serves as preheating of petroleum is E-201-01A / B to E-201-11 or commonly referred as a pre-heater circuit. The important role of the pre-heater in the Crude Distillation Unit (CDU V) is significant in order to evaluate the performance of the heat exchanger so that it can be used as a basis for carrying out the cleaning process if it is found when its performance has decreased. Performance evaluation is conducted by comparing the Dirt Factor / Fouling factor (Rd) of the design data and the actual data obtained. The results obtained were heat exchanger E-201-04A / B, E-201-05A / B, E-201-06, E-201-08A / B, E-201-09, E-201-10A / B, and the E-201-11 had the actual Rd value higher than the design Rd, which indicated that there had been a decrease in performance on the heat exchanger. Heat exchanger E-201-04A / B, E-201-05A / B, E-201-06, E-201-08A / B, E-201-09, E-201-10A / B, E-201- 11 had the actual Rd value lower than the design Rd which indicated that the heat exchanger was still performing well. Heat exchangers that have a higher Actual Rd value than RD design are recommended to carry out immediate cleaning according to the conditions of the tool.
Copyright (c) 2023 JURNAL TEKNIK KIMIA VOKASIONAL (JIMSI)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright Transfer Statement
The copyright of this article is transferred to JIMSI and when the article is accepted for publication. the authors transfer all and all rights into and to paper including but not limited to all copyrights in the Psikostudia. The author represents and warrants that the original is the original and that he/she is the author of this paper unless the material is clearly identified as the original source, with notification of the permission of the copyright owner if necessary. The author states that he has the authority and authority to make and carry out this task.
The author states that:
- This paper has not been published in the same form elsewhere.
- This will not be submitted elsewhere for publication prior to acceptance/rejection by this Journal.
A Copyright permission is obtained for material published elsewhere and who require permission for this reproduction. Furthermore, I / We hereby transfer the unlimited publication rights of the above paper to Jurnal Teknik Kimia Vokasional. Copyright transfer includes exclusive rights to reproduce and distribute articles, including reprints, translations, photographic reproductions, microforms, electronic forms (offline, online), or other similar reproductions.
The author's mark is appropriate for and accepts responsibility for releasing this material on behalf of any and all coauthor. This Agreement shall be signed by at least one author who has obtained the consent of the co-author (s) if applicable. After the submission of this agreement is signed by the author concerned, the amendment of the author or in the order of the author listed shall not be accepted.
Rights / Terms and Conditions Saved
- The author keeps all proprietary rights in every process, procedure, or article creation described in Work.
- The author may reproduce or permit others to reproduce the work or derivative works for the author's personal use or for the use of the company, provided that the source and the Informatika Mulawarman copyright notice are indicated, the copy is not used in any way implying the Jurnal Psikostudia approval of the product or service from any company, and the copy itself is not offered for sale.
- Although authors are permitted to reuse all or part of the Works in other works, this does not include granting third-party requests to reprint, republish, or other types of reuse.
Jurnal Teknik Kimia Vokasional by http://e-journal.polnes.ac.id/index.php/jimsi licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
