DESAIN SARANA BAWA PERALATAN UNTUK BIDAN MANDIRI
Abstract views: 406
,
pdf downloads: 472
Abstract
Abstrak
Sarana bawa adalah salah satu produk yang sangat perlukan pada kebutuhan sehari-hari. Terdapat banyak ragam macam sarana bawa, salah satunya tas untuk membawa peralatan kesehatan. Salah satu yang membutuhkan sarana bawa peralatan kesehatan adalah bidan mandiri. Saat ini, bidan mandiri belum memiliki sarana bawa yang dapat memudahkan mereka dalam membawa peralatan kesehatannya. Bidan mandiri memerlukan sarana bawa yang memiliki mobilitas dikarenakan pekerjaannya yang tidak hanya di klinik, juga di rumah pasien.
Berdasarkan data tersebut, dipilih tas untuk membawa peralatan kesehatan bidan mandiri. Peneliti melakukan penelitian yang ada hubungannya dengan tas peralatan kesehatan bidan mandiri. Dilakukan pengumpulan data dari literatur, studi kasus dengan wawancara dan observasi dengan bidan mandiri, dan kompetitor dari tas untuk bidan mandiri. Setelah semua data terkumpul, dilakukan analisis data. Untuk mendapatkan sintesa desain, analisa harus terpenuhi. Jika sintesa dan konsep dari tas untuk bidan mandiri sudah dilakukan, maka dimulai pembuatan alternatif desain tas peralatan untuk bidan mandiri. Dari alternatif desain tas peralatan untuk bidan mandiri ini dilakukan kuesioner untuk mendapatkan rekomendasi untuk final desain. Lalu penelitian ini ditutup dengan kesimpulan dan saran
Abstract
Tool carrier is one of a product that needed in daily life. There is many variety of tool carrier, one of the tool carrier is for carry medical instruments. One of who needs a tool carrier for medical instruments is independent midwife. At the moment, independent midwife doesn’t have tool carrier that could ease them in carrying their medical instruments. Independent midwife needs tool carrier that have mobility because their work doesn’t only in clinic, also in patient’s house.
Based on that data, bag has chosen for carrying medical instruments’ independent midwife. Researcher did a research that have connection with the bag for independent midwife medical instruments. Data were collected from literature, case of study along with interview and observation on independent midwife, and competitor from bag for independent midwife. After every data collected, analysis data needed to do. To get design synthesis, analysis should be completed. If design synthesis and concept of bag for independent midwife were done, then begins to make design alternative bag of medical instruments for independent midwife. From the alternative bag of medical instruments questionnaire needed to do to get recommendation for final design. Then this research closed with conclusions and suggestions.
Downloads
References
Hidayatullah, Muhammad, (2019), “Desain Tas Peralatan Kesehatan Co-Assistant”, Prosiding Seminar Nasional Sains dan Teknologi Terapan, 2685-6875, hal.563-568
Rizani N.C dan Satria A, (2013), “Identifikasi Kebutuhan Pelanggan dalam Perancangan dan Pengembangan Konsep Tas Backpack yang Ergonomis dan Multifungsi”, Jurnal Teknik Industri, 1411-6340, hal.43
Perancangan dan Pengembangan Konsep Tas Backpack yang Ergonomis dan Multifungsi”, Jurnal Teknik Industri, 1411-6340, hal.43
Sukania, I Wayan, (2009), “Perancangan Tas Ergonomis”, Jurnal Teknik Industri, 978-979-704-802-0, hal.4
Witarsa, Vhany, (2015), Eksplorasi Aplikasi Alas Kaki yang Terinspirasi dari Kelom Geulis, hal.7
Gerakan Nasional Peduli Obat dan Pangan Aman, (2015), Materi Edukasi Tentang Peduli Obat dan Pangan Aman, Badan POM, Jakarta.
Kementerian Kesehatan dan Badan Penelitian Pengembangan Kesehatan, (2018), Kesehatan Utama Riskesdas 2018, Kementerian Kesehatan Republik Indonesia, Jakarta.
Kementerian Kesehatan Republik Indonesia, (2020), Peraturan Menteri Kesehatan Republik Indonesia Nomor 2 Tahun 2020 Tentang Standar Antropometri Anak, Kementerian Kesehatan Republik Indonesia, Jakarta.
Kementerian Kesehatan Republik Indonesia, (2004), Peraturan Menteri Kesehatan Republik Indonesia, 1184/MENKES/PER/X/2004, Kementerian Kesehatan Republik Indonesia,Jakarta.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
