KAJIAN ESTETIKA IMPLEMENTASI BAMBU LAMINASI PADA TRANSFORMABLE FURNITURE BRUNA CABINET
Abstract views: 12
,
PDF downloads: 4
Abstract
The limitation of wood as a raw material for furniture production has prompted researchers to seek non-wood alternative materials. Among these alternatives, bamboo has been utilized for furniture production. However, the bamboo used is typically in its whole form, which restricts the types and shapes of furniture that can be produced. Using the design thinking method, starting from the empathize, define, ideate, prototype, and test stages, the goal of this research was to explore the aesthetic value of a cabinet that can transform from one function to another using processed bamboo material—specifically, vertically laminated bamboo with grooves. Data collection involved initial questionnaires distributed to potential users, interviews with bamboo processing industry practitioners, and a literature review of books, journals, and internet articles. The final outcome of this study is a working drawing and a prototype cabinet made from laminated bamboo material that can transform into a writing desk. Respondent evaluations indicated that the prototype was 71.39% comfortable (Good) and had an average aesthetic rating of 84.125%. Additionally, 33% of respondents expressed interest in purchasing the prototype at the specified price.
Downloads
References
Andansari, D., & Aglisyifa, N. (2018). Andansari, D., & Aglisyifa, N. (2018). Desain meja tamu (studi kasus: proyek pembuatan meja tamu di PT Buran Nusa Respati Samarinda). Jurnal Kreatif, 6(1): . Jurnal Kreatif : Desain Produk Industri dan Arsitektur, 6(1), 46 – 54. doi:https://doi.org/10.46964/jkdpia.v6i1.35
Arsad, E. (2015). Teknologi pengolahan dan manfaat bambu. J. Ris. Ind. Has. Hutan, 7(1), 45-52.
Fariyanto, F., Suaidah, & Ulum, F. (2021). Perancangan aplikasi pemilihan kepala desa dengan metode ux design thinking (studi kasus:kampung kuripan). Jurnal Teknologi dan Sistem Informasi,, 2(2), 52–60.
Hidayanto, A. F., Nur, D. J. S., & Atmono, Y. F. S. (2023). Desain meja belajar anak bergaya tetris. Jurnal Kreatif : Desain Produk Industri dan Arsitektur, 11(2), 21 – 29. doi:https://doi.org/10.46964/jkdpia.v11i2.428
Indahyani, T., & Dewanti, R., Nabilla. (2023). Penerapan bambu pada furnitur dan aksesoris interior sebagai nilai tambah homestay di desa wisata. Reswara:Jurnal Pengabdian Kepada Masyarakat, 4(1), 821-831.
Li, W., & He, S. (2019). Research on the utilization and development of bamboo resources through problem analysis and assessment. Paper presented at the IOP Conference Series: Earth and Environmental Science.
Mubarat, H., Viatra, A. W., Pambudi, D. R., & Ansyah, A. (2024). Pelatihan kerajinan bambu untuk meningkatkan keterampilan dan pendapatan masyarakat desa gajah mati kecamatan babat supat kabupaten musi. Jurnal Abdimas Galuh, 6(1), 676 - 685.
Pramiyati, T., Jayanta, J., & Yulnelly, Y. (2017). Peran Data Primer pada Pembentukan Skema Konseptual yang Faktual (Studi Kasus: Skema Konseptual Basisdata Simbumil). Jurnal SIMETRIS, 8(2), 679-686.
Putra, I. G. A. P., Putra, N. T. S., Gunawarman, A. A. G. R., & Putra, I. B. G. P. (2021). Potensi Bambu Sebagai bahan Alternatif Untuk Furniture. J. Ilm. Arsit. Univ. Warmadewa, 55-60.
Razi, A. A., Mutiaz, I. R., & Setiawan, P. (2018). Penerapan metode design thinking pada model perancangan ui/ux aplikasi penanganan laporan kehilangan dan temuan barang tercecer. Demandia,, 3(2), 75–93.
Rediansyah, S., Listiani, W., & Budi, D. S. U. (2022). Kreativitas pengrajin dalam pengembangan kerajinan bambu desa Selaawi kecamatan Garut. Pantun Jurnal Ilmiah Seni Budaya, 7(2), 180-198.
Statistik, B. P. (2016). Statistik Produksi Kehutanan 2015 dan 2016. Jakarta Badan Pusat Statistik.
Sulastiningsih, I. M., Nurwati, & Santoso, A. (2005). Pengaruh lapisan kayu terhadap sifat bambu lamina. Jurnal Penelitian Hasil Hutan, 23(1), 15-22.
Tumonglo, N. Y., Ridwan, & Nur’aini, Y. (2020). Pengawetan Bambu Dengan Menggunakan Larutan Boraks Boriks. Jurnal Saintis, 1(2), 25-30.
Wiradarmo, A. A., Andani, D., Danta, I. K., Gaol, C. P. L., Putra, B. S. D., & Gunawan, A. J. (2022). Desain dan pelatihan produk bambu untuk pemberdayaan kampung kreatif sekebuluh. Jurnal Pengabdian Kepada Masyarakat, 1(2), 130 – 143.
Copyright (c) 2024 Eilsa Adelia
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
