TEMPAT PENYIMPANAN PERLENGKAPAN PEMBUATAN PIN
Abstract views: 311
,
pdf downloads: 282
Abstract
abstract
In this modern era, most people need objects that are useful for their daily routine and as a means of communication that usually form of identification or souvenir. One of the most common identification and souvenirs used by the public is the pins and key chains. Pick-knitting materials and key chains that belong to many diverse sizes should have a special storage area that can be used in addition to storing pin fixtures, but also used to protect from damage and not scattered anywhere. However, from the observation of some printing media in Samarinda one of them in Mabes O2, it is known that the storage of pin equipment that they use today is only a plastic paper stacked in a cardboard box or plastic so that the equipment makes the pin making material becomes very easy to mix. In a report entitled "Storage Place of Pin Making Equipment" has provided a new alternative in the development of pin storage equipment design. The purpose of this project is to design an innovate product that facilitates and accelerates the user in the production process of finishing pin or key chain. By using the methods that have been done are: field data collection, analysis, alternative design, development of selected design alternatives and final design, so that the design produced the storage equipment pin that has the concept of modern minimalist design style.
Keywords: ID Card, Pin, Storage, Minimalist, Modern
Downloads
References
Akmal, Imelda, (2013), Seri Rumah Ide–Cermin Interior, PT Gramedia Pustaka Utama, http://www.books.google.co.id, (28 Mei 2018)
Anggara, P. D., (2014), Pengaruh Jarak Screw Terhadap Kekuatan Sambungan Pada Baja Ringan, Universitas Negeri Surabaya, (01 Maret 2018)
Cahyadi, Dwi, (2014), Aplikasi Mannequin Pro untuk Desain Industri, LeutikaPrio, (26 November 2017)
Fauzi, Rosyid Hanif, (2009), Detail Produk Pin Magnet 58mm, http://www.books.google.co.id, (19 Februari 2018)
Firmansyah, Dito, (15 Juli 2016), Cara Membuat Pin Peniti dan Pin Gantungan Kunci, UD Wijaya, http://www.books.google.co.id, (03 Oktober 2017)
Ginting, Rosnani, (2010), Perancangan Produk, Graha Ilmu, http://www.books.google. co.id, (09 Januari 2018)
Kasali, Rhenald, (2007), Membidik Pasar Indonesia, PT Gramedia Pustaka Utama, (23 Oktober 2017)
Lenggosari, (2002), Paduan Warna Menarik Untuk Rumah, Griya Kreasi, http://www.books.google.co.id, (18 April 2018)
Lensuffie, Tikno, (2009), Mengenal Kontruksi Kayu untuk Furniture dan bangunan, Esensi Erlangga Group, http://www.books.google.co.id, (19 Februari 2018)
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
